Brushes For Water Bourne, Water based
& Acrylic Paints

The specific density of water borne or water based paint is much heavier than lacquers & enamels. It is therefore necessary to use a brush with a little more body. Pure squirrel hair is fine for the lacquers & enamels, but a little too soft for the higher density water borne paints. We have developed a brush with a squirrel and taklon mixture to give you the desired hair weight for water borne paints.

Lettering Quills

Series 2179

(Actual Size)

  • Approximately 50% Brown Taklon & 50% Pure Kazan Squirrel. Our preferred mixtures for waterbase & acrylic paint

  • Cream Handles With A Brown Tip
Sizes 0 1 2 4 5 6 8 10 12
Lengths 11/16" 3/4" 7/8"

1"

 1-1/16" 1-1/8" 1-3/16" 1-5/16" 1-3/8"

Graduated Hair Lengths

One Stroke

Series 2962

(Actual Size)

  • Approximately 50% Brown Taklon & 50% Pure Kazan Squirrel. Our preferred mixtures for water base & acrylic paint.

  • Cream Handles With A Brown Tip
Sizes 1/8" 1/4" 3/8' 1/2" 5/8" 3/4" 1"
Lengths 1-1/8" 1-1/4" 1-3/8"

1-1/2"

 1-5/8" 1-3/4" 1-7/8"

Graduated Hair Lengths

Outliners

Series 2838 


  • Approximately 50% Brown Taklon & 50% Pure Kazan Squirrel. Our preferred mixtures for water base & acrylic paint. Kazan Squirrel.
  • Cream Handles With A Brown Tip
Sizes 00 0 1 2 3 4 6
Lengths 1-11/16" 1-11/16" 1-11/16"

1-11/16"

 1-11/16" 1-11/16" 1-11/16"

Pinstriping Brush For Water based & Acrylic

Series 70
 Mixture Of Squirrel Hair & Taklon


(Actual Size)

Made just like our Mack-Lite Pinstriping Brush, but with mixed hair to give the brush more body. Water based paint has a higher density and we must mix taklon with pure squirrel for body and snap. A generous amount of pure squirrel ensures the brush can carry enough paint to make it a good striper.
Sizes 00 0 1 2
Length Out In Inches 1-5/8" 1-3/4" 1-7/8" 2"

 

Andrew Mack & Son Brush Co. 225 East Chicago St. PO Box 157 Jonesville, Michigan U.S.A. 49250
Phone:  517- 849- 9272  Fax: 517- 849- 2251
©2007 Andrew Mack and Son Brush Company